The bigger the pixel setting, the more memory space it would take. In order to have more space on memory without deleting, change the resolution to a smaller one, EX: change it from 8M to 2M or less.

The battery cannot be removed by user so it is suggested to take this device to our repair centre for further inspection and service.

The device can last for around 2 weeks with standby mode.

Some web mail server(such as Yahoo or Gmail…etc.) will identify the current setting of the browser and disable some supports automatically when it detected the browser setting was for desktop. The virtual keyboard is one of them. The default browser in R100 is set as desktop so the web-based e-mail function is somewhat limited by the e-mail server or web site. User may download other browsers which is for mobile devices from C-market or Q-market such as Dolphin Browser or Droid Surfing. The default setting on these browsers is for mobile devices and will be hassle-free to use virtual keyboard to edit a web-based e-mail.

E600 lens is produced by Asia Optical, which is also ODM for Olympus spinning lens digital camera. (Model: FE5500). A scientific explanation is that E600 lens is an Olympus-qualified lens. ( Qualified Olympus incoming standard) Call center explanation to

The machine could still be used under those environment but the performance will be a little bit worse than the suggested condition.

"1. Turn off the set. 2. Take out the SD card. 3. Long press ""Home"" key and turn on the set. 4. That will reset the set to factory default and clear everything including but not limited to all settings, e-mail and apk installed."

Yes, both can be stored.

You can check it through system info.

Press “menu” under shooting mode, choose “voice narration” then press “SET” to switch it on. When taking pictures, the picture will pause for a while and the screen will display “Voice Recording”. Record the narration and press the shutter button to stop

"1. Turn off the set. 2. Take out the SD card. 3. Long press ""Home"" key and turn on the set. 4. That will reset the set to factory default and clear everything including but not limited to all settings, e-mail and apk installed."

"No. R100 does not support QR code, because - 1. There is no QR code recognition application embeded. 2. The resolution of R100 webcam is only 0.3M pixels, which is not capable to resolve QR code.

"U121 SSD is using mini card interface. Although user can get mini card interface SSD from market, but we do not guarantee they are compatible. U121 SSD pin definition is special for BenQ, it is not a standard spec. Please contact BenQ service center to purchase an official approved SSD.

Up to 32GB class 10 is supported, it's recommended to use Sandisk SDHC cards to avoid compatibility issues.

10 faces, but the number of detected faces might be different from the actual ones, depending on environmental factors such as light.

Sound is temporarily muted during zoom in/out to prevent lens motor sound from being recorded.

When the battery is being charged, the status of LED indicator will flash in green, and will be off after it's been fully charged.

LM100 may be charged thru both USB cable (to PC) and AC power adapter (to wall outlet).

For all versions of Windows Operating system - Click START button, then click on CONTROL PANEL. Select POWER MANAGEMENT icon. Under Power Schemes drop-down menu, select - ALWAYS ON.

"To calibrate color, we suggest you to set picture mode in OSD to “sRGB” for better color matching. You could also try to enter into the factory mode & adjust the color temperature according to the steps as below. 1. Enter into FACTORY mode: Press[MENU], [Enter]& [POWER] at the same time, when Monitor is power on, OSD menu will be shown with “F” on the left top. Select “F” for entering factory mode. 2. To adjust the color temperature: a. Do “Auto Color Balance” at 1920×1080@60Hz, 32gray shades b. Measure color temperature, check it complies with the following temperature : 5800K x=0.326 +/- 0.02, y = 0.342+/-0.02 6500K x = 0.313 +/- 0.02, y = 0.329+/-0.02 9300K x = 0.283 +/- 0.02, y = 0.297+/-0.02 If the user wishes to do more professional color calibration, he can consider buying a monitor color calibrator, such as “eye-one”. The calibrator would produce suitable ICC profile for Photoshop.